Fire-Rated Warehouse & Industrial Partition Walls

Stancold supply partition walls designed specifically for large industrial buildings to meet temperature, smoke and fire control requirements.

Highly certified to meet BS476 part 22, LPS 1208 and LPS 1181, Stancold’s warehouse and industrial dividing walls allow you to manage your work environment in multiple ways, from creating storage enclosures through to office spaces. They provide 30 to 240 minutes of complete fire resistance and can be adapted to suit specific building regulations, as approved by the Loss Prevention Certification Board (LPCB).

We are one of a few installers in the UK holding the LPS 1500 certification from LPCB (Loss Prevention Certification Board) to install LPS 1208 approved fire-resisting compartmentation systems.

A range of fire protection solutions can be chosen from, including fire batt, penetration seals, steel encasement and fire boarding, tumescent painting and flame spread details.

Stancold’s experienced team of fully certified in-house installers will ensure a fast and clean installation process is carried out, minimising disruption to a busy production environment.

To arrange your site survey, or to find out more about using Stancold’s warehouse and industrial dividing walls, please call us on 0117 316 7000.

System Benefits

Speedy Low Cost Installation (up to 2000m² per week)
Fully Accredited & Quality Assured Construction
Pre-Finished, Maintenance-Free, Easy To Repair
Fully Demountable & Recyclable

Unsupported Spans in Excess of 7.5m
Thermally Efficient Construction (U Values as low as 0.22w/m²k)
Can Offer Up To 4 Hour Fire Resistance
Fully Building Regulation Compliant

Our firewall system can be used for industrial applications as on office-to-warehouse partition, as a subdividing wall, boundary wall or a staircase enclosure to name just a few.

The composite walls and ceilings we provide are a competitive alternative to blockwork and jumbo stud, require no wet trades or messy works and are virtually maintenance-free.

FAQ

1. What is passive fire protection?

As opposed to active fire protection such as fire alarms and fire suppressants, passive fire protection is built into the property in form of a fire rated wall or door for instance, and does not require activating in order to fulfil its role.

Passive fire protection is fundamental to the construction of industrial and commercial buildings.
The scope of passive fire protection is to maintain the fire to its point of origin and prevent the flames and smoke from spreading through the building. Passive fire protection has the ability to protect the structural integrity of the property reducing its likelihood to collapse thus maintaining vital escape routes, limiting the damage to the property and reducing repair costs.

2. Why are Mineral Fibre cored composite panels suitable for passive fire protection?

Passive fire protection systems based on composite panels are more flexible, cheaper and quicker to install than traditional masonry or jumbo stud partitions.
Mineral Fibre panels have the ability to prevent the penetration of hot gases and flames and can reduce the temperature rise on the unexposed side of a fire, thus preventing fire spread through radiated heat.

The advanced sandwich structure provides panel strengths in excess of 50 kN/m². Combined with a weight of just 15–38 kg/m², depending on panel thickness, installation becomes far quicker and easier. The weight includes insulation, vapour barrier and finished surfaces.

3. Why can Stancold offer professional advice?

As members of the FPA (Fire Protection Association) we can provide guidance regarding Building Regulations, loss prevention and risk assessment.

System Benefits

Specialist Flour Producer

Parkway MK

60-Minute Fire-Rated Division Wall in South West